Already have something in mind?
Bespoke: size, colour, finish
Already have something in mind?
Bespoke: size, colour, finish
Most executive tables give you sizes; X12 gives you four architectures. A freestanding desk on two legs. A leg paired with a lacquered monolith on the right. The mirror version with the monolith on the left. And full compositions where a return top rides on a third lifting column. Same tops, same finishes, four different ways of occupying a cabin — the choice is structural, not cosmetic.
Designed by Dorigo Design, X12 adjusts electrically from 76 to 125 cm and carries tops veneered in grey elm, American walnut or striped ebony, with an optional stitched leather inlay; legs and monolith take a matt lacquer in 25 shades. A service cupboard slots below, a pedestal rolls beside, and the cable path is engineered from grommet to floor.
La Mercanti delivers X12 across India and worldwide, supporting architects and buyers from sample to installed cabin.
Collection: X12, Quadrifoglio Group — design Dorigo Design.
Type: height-adjustable executive table; architectures with 2 legs, with leg and monolith (right or left), or with return top on 3 lifting columns.
Tops: W 180.8 / 200.8 / 220.8 cm × D 100 cm; return top 120 × 60 cm.
Height range: 76–125 cm with 2 legs; 76–103.5 cm in the monolith architecture; telescopic 3-stage columns, 83 × 53 mm section.
Lifting system: motor built into the column body, 700 N per column; control box for 2 or 3 columns with digital synchronisation, gyroscope-based anti-collision stop (dedicated gyroscope for the return), assisted start and stop, integrated Bluetooth; 3-memory keypad; standby 0.1–0.5 W; 100–230 V, UL edition 100–240 V; 3 m cords.
Top build: 18 mm panel with wood veneer, 50 mm folded edge band from a single piece, open-pore matt varnish; optional leather inlay 1.3 mm with tone-on-tone stitching; head sides closed by a 50 mm brushed aluminium profile.
Top finishes: grey elm, American walnut, striped ebony; leather inlay in brown, black, red or anthracite.
Frame: steel tube 40 × 20 mm, epoxy powder coated; lacquered legs and monolith with removable casing; levelling feet 0–12 mm.
Frame finishes: 25 matt lacquers, full RAL range on request; metal in anthracite or umbra grey; brushed chrome profile.
Storage: optional 80 cm push-pull cupboard with three-way adjustable hinges; pedestal 45.4 × 58.5 × 58.1 cm with three full-extension soft-close steel drawers plus pencil tray and recessed castors.
Cable management: 80 mm grommet with dust brush, retractable power module with USB A+C, self-closing braided sleeve 2 m, extendable cable spine, release cable tray; drilling position specified at order.
Pairs with: X10 and E10 meeting tables from the same collection.
Share the finishes you wish to evaluate
Five steps to choose veneer, leather and lacquer for an X12 before placing the order.